uFSEAL O-Ring

O-Ring Technical requirements

O-ring is the most commonly used mechanical seal design. O-ring can withstand pressure of tens of MPa and is widely used in industries such as sanitary equipment, valves, pneumatic components, power tools, automobiles, chemicals, etc.

ADVANTAGES

The company introduced the international quality system- ISO 9001-2000 to guide the production and operation.

O-Ring ADVANTAGES 01

O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications.

O-Ring ADVANTAGES 02

O-Ring sizes are defined by the inner diameter-ID and the cross section-CS , our o-ring Inner Diameter can be from 0.5mm to 1500mm .

O-Ring ADVANTAGES 03

Standard sizes such as AS568(PARKER sizes), JIS(P TYPE,G TYPE,S TYPE ,V TYPE ,F TYPE sizes) , BS1516 sizes Metric sizes as well as non-standard sizes are all available.

O-Ring ADVANTAGES 04

We have more than 5000 o-ring mould , so you could get any size here without set-up or tooling charge . Huge inventory of o-rings can meet your urgent requirements.

O-Ring ADVANTAGES 05

A very wide range of rubber material can be selected , main material: NBR (BUNA-N, Nitrile) , VITON(FKM) , Silicone(VMQ) ,HNBR, FFKM ,EPDM , PU(Polyurethane , urethane),Fluorine silica gel(FVMQ),Neoprene(CR) and so on. Hardness of material can be from 40 Shore-A (hardness) to 90 Shore-A (hardness)

O-Ring Features 06

Good sealing solution , long service life .

Easy installation reduces risk .

Working in various medium based on different elastomer material.

RELATED PRODUCTS