how to remove paint from a scuba tank

If you do scuba diving, there is no doubt that you will run into a scuba tank that has been painted.
There are two reasons why people draw scuba tanks.
First, they mistakenly think that painting the tank will actually protect the tank, and second, give their tank a unique style.
What is often misunderstood is that painting tanks is actually capturing air between tanks and paint, causing corrosion.
Fortunately, you can remove the paint with some relatively simple measures to make your tank look as close to the new one as possible in a short period of time.
Description difficulty: use some painter tape to tape the valve area off slightly to keep it clean and to protect it from damage and contamination.
Use a line brush to rate the paint.
All you need to do is remove enough paint to provide a good foothold for your chemical paint remover to do a good job.
As close as possible to the metal of the tank without scratching the tank itself.
Wear rubber gloves.
Apply the chemical stripping device to the storage tank using a paint brush.
The stripper is allowed to finish the work within 15 to 30 minutes.
The paint should be bubbling.
Clear all sparkling paint.
You should be able to remove some with your fingers and remove more stubborn spots with a wire brush.
Repeat steps 2 to 4 if necessary to remove all thick paint from the tank.
Rub the tank down with a clean cloth, remove all the deep-rooted paint, and restore the tank to a glittering silver state.
Tips & WarningsArticle by Patrick CameronPatrick Cameron is a freelance writer with 10 years of extensive experience in consumer goods brands, promotions and retail communications.
He works at his home in Denver, Colorado.
He received a bachelor\'s degree in mass communication from the University of Minnesota.