loading

No leakage of worry - free sealing solution.

E-mail: huanggu@188.com

How to Size a SCUBA Mask to Face Size

You can find scuba masks in a wide variety of designs, colors and styles, but before deciding to buy them, it\'s a test to try and make sure it fits.For comfort, safety and non-ventilation, you need to have a scuba mask that is in the right size.When wearing a mask, make sure it covers your nose, as this will help you balance the air space in your ears and the air between the face and the mask to avoid \"face or ear squeeze\" when diving \".Description difficulty: it is easy to find a scuba mask with a nasal chamber that allows your nose to have enough space between the lens of the eye.The width and length of the compartment should leave room for your nose and a little extra space so you can blow your nose out if necessary.Check the depth of the mask by looking at the silicone skirting to determine if you need to keep a low profile (with a smaller skirt, usually for smaller faces, eyes closed, nose and mouth) or a high profile (with a larger skirt, mainly for a larger face, with wide eyes, nose and mouth) scuba mask to fit the size of your face, and consider your cheekbone area.Put the mask on the face, breathe in through the nose, form a suction force, and fix the mask in place without wearing a scuba mask or silicone skirting.Open the mask for a minute, then gently lean against the mask to see if a safe seal is formed.If the mask is easy to remove, or the vacuum is not possible, you need to repeat these first steps with a different mask until you find a comfortable and comfortable mask.Look in the mirror and see how the nose compartment has space under your nose, and also see how close the silicone skirting is to your upper lip.If it\'s too close (depending on how comfortable you are), you need a shorter scuba mask or lowprofile model.Confirm that the mask is suitable for your face and will not go through your cheekbones or that the mask is not suitable and the seal will not be fixed.Grinning when you look in the mirror and see if there is a gap above your upper lip.Keep in mind that there should be no obvious gaps in the scuba mask when doing any normal facial movements.If there is a gap, try a different mask for the right fit.Michelle Nesby started her writing career in 1999 when she wrote the title searcher manual.\"Nesbit has written an article for Chattanooga, the wellness freak, and several clients who have ensured her service as a ghostwriter.The background for Nesbit includes insurance licenses, rescue and technical diving certifications, underwater photographers and clinical hypnotherapy therapists.As a clinical nutritionist, Nesbit is currently completing the study.

GET IN TOUCH WITH Us
recommended articles
200 questions Info center Application
Home Appliance Industry
Used for sealing of pipe joints, caps and rotating parts; The seal is required to have food grade, corrosion resistance, high speed and other properties.
New Energy Industry
Sealing of rotary parts, connecting parts, etc
Equipment Industry
Used in hydraulic system, rotary system, pipe joint, quick plug valve and other components;Seal ring is required to have good deformation resistance, high tensile properties.
Mining Industry
Mainly used for mining equipment, transportation equipment, crushing equipment, grinding equipment, etc.The seal ring is required to have high wear resistance, good pressure resilience and high ductility;
Our o-ring have been tested according to the requirements of NORSOK M-710 Edition 3/ISO 23936-2.(Rapid gas decompression resistance).the test passed. This kinds of o-rings are widely used by pump.
Valve And Pipe Industry
It is mainly used for valve stem seal, pipe fitting connection seal, middle cavity flange seal, pump shell connection seal, pump shaft seal, etc.
Chemical Industry
Mainly used for reactor, pipe, pump, valve and storage and transportation equipment;The main requirements of sealing ring corrosion, high temperature resistance and other properties.
Metallurgical Industry
Hydraulic seal, rotary seal, pump seal, etc.
Our company can produce mould and products.In order to improve productivrity, we import 4 
CNC machine. our customer can get products quickly.
Oil & Gas Industry
Mainly used in oil and gas production equipment、refining and chemical equipment、conveying equipment and so on; The seal ring is required to be corrosion resistant, high temperature resistant, explosion-proof and other properties.
no data

Suzhou Ultimate Sealing Technology Co.,Ltd is a collection R&D, production, sales in one of the enterprises.

Contact us

Contact Person: Mr.Huang
Tel: +86-13338652764  
Company Tel: +86-0512-65792190
Fax: +86-0512-65793583
E-mail: huanggu@188.com
Wechat: 13338652764 
Office Add: Suzhou Industrial Park Zhongxin Ecological Building 
Copyright © 2025 Suzhou Ultimate Sealing Technology Co.,Ltd. | Sitemap  |  Privacy Policy
Customer service
detect